- MG8900seriesRadar material level Transmitter
-
● MG8910seriesGuided wave radar level transmitter
● MG8920seriesNon contact type radar level transmitter
- Product line
- Principle
- Technical Data
- Properties
- Application
● MG8910seriesGuided wave radar level transmitter
● MG8920seriesNon contact type radar level transmitter
Measurement parameters: Liquid level, interface, material level
Type of probe: Single rod type, double rod type, coaxial type, lateral type
Dielectric constant: ≥1.4
Electrical interface: 1/2"NPT/M20×1.5
input voltage: 13.5~30VDC、With polarity reverse connection protection
Process pressure: 0~250bar(0~25MPa)
Process temperature: -58~788℉(-50~420℃)
output signal: Second tier system 4~20mADC、HART
measurement accuracy: ±5mm
Process display : 4~20mA、Percentage、Engineering unit
Length of probe : Rigidity 20~236"(500~6000mm);Flexibility 20~2362"(500~60000mm)
material : 316LSST、304SST、Ti、304LSST、Ta、Lining PTFE anti-corrosion etc.
tensile strength : Flexibility Probe Single rod
outside diamete0.2"(5mm)3100pound(14kN)
Flexibility Probe Double pole
outside diamete0.2"(5mm)2210pound(10kN)
Process connection : Flange connection or threaded connection
Ex-mark: safe in nature Ex iaⅡC T1~T6
explosion-proof Ex dⅡC T1~T5 Gb
protection degree: IP67
● The microwave signal of the guided wave radar can be transmitted along the antenna, which can eliminate the false echo signal, reduce the loss of signal and high reliability.;
● No drift, not affected by atmospheric conditions and medium density changes, wetted parts for stainless steel and PTFE material, resistance to acid and alkali and other corrosive medium;
● Module has good compatibility, and the replacement module does not need to be calibrated.
Liquid level, interface、Slurry, powder, particles, mixed media, emulsion layer medium, density change of